Used 2000 1840 Case Skid Steer

Description

The Case 1840 skid steer loader features a 3.9L diesel engine, 1,400 lb rated operating capacity, and a maximum lift height of 110.5 inches.

Engine and Driveline

The Case 1840 is powered by a Case 4-390 four-cylinder, 239 cu.in (3.9L) direct injection diesel engine, naturally aspirated, with a mechanical flyweight governor and positive pressure lubrication system. It uses a 1-speed hydrostatic transmission with 4-wheel drive and a single-reduction chain final drive. The drive pump is a tandem axial piston type, and braking is handled by independent wet disc brakes

Hydraulic System

The loader has an open-center hydraulic system with a gear pump rated at 15.3 gallons per minute (57.9 L/min) and a system relief pressure of 2,300 psi (159 bar). This provides sufficient power for attachments and lifting operations

Lift and Capacity

• Maximum lift height to hinge pin: 110.5 inches (2,810 mm)
• Dump height: 84 inches (2,130 mm)
• Rated operating capacity: 1,400 lbs (635 kg)
• Tipping load: 2,800 lbs (1,270 kg)
  These capacities are SAE-rated and measured with standard equipment

Dimensions and Tires

• Tires: 10×16.5 standard, with 80HT continuous roller chains
• Bucket: Standard 54-inch dirt bucket
• Operator weight for specs: 175 lbs (80 kg)
• Counterweight: 100 lbs (45 kg)
  Dimensions are measured with full fuel and standard equipment

Additional Features

• Cooling system: Pressurized
• Air cleaner: Dry type
• Charging system: Alternator
• Hydraulic cycle time: Measured with rated load in bucket
• Attachments: Compatible with standard Case attachments; safety and reliability of third-party attachments not guaranteed
  The Case 1840 is a compact, versatile skid steer suitable for construction, landscaping, and material handling, offering reliable performance with its hydrostatic drive and robust hydraulic system